XAG P100 2022, Руководство по эксплуатации для пилотов

Страница: 57 / 145

57
XAG AUSTRALIA
01. Connect the Power Port and AC Power source with the 15A Power cable.
02. Connect the Charger Terminal to the Battery Terminal.
03. Power ON the Battery to Start Battery charging.
📖
INSTRUCTION
√ ENSURE there are no obvious defects on the Battery or the Charger before use.
√ ENSURE there is no liquid or foreign matter on the battery terminal, wipe and clean in a timely
fashion. Otherwise, it may cause poor contact, resulting in loss of power or charging failure.
√ ENSURE Battery & Chargers is placed on even ground with no nearby combustible materials.
√ ENSURE Batteries have a minimum of 30cm distance between the batteries and Chargers
during Charging.
X DO NOT clean the charging device with alcohol or other combustible liquids.
X DO NOT disconnect the AC cable or the Charging cable while the Charger is in use. Remove
batteries after charging is completed.
X DO NOT use this product under direct sunlight, in rain, or in a humid environment.
🧷
IMPORTANT
The battery management system will automatically suspend the charging if the temperature is over
55° C, and resume after the temperature drops below 55° C. The ideal ambient charging temperature
(20° to 35° C) for charging helps maintain the normal service life of the battery.
The battery level indicators corresponding to the current battery level will be solid green, and the
remain will be flashing in series indicating the battery is currently charging. Once the charging is
completed, the buzzer will beep for 30 secs and all the battery level indicators will flash for 2 minutes,
then the battery will turn off automatically.
Battery Charging