XAG P100 2022, Руководство по эксплуатации для пилотов

Страница: 30 / 145

XAG AUSTRALIA 30
Installation Guide
Pre-Assembly Requirement
Before assembling the XAG ® RevoCast 2, the XAG ® RevoSpray 2 System and Nozzle Extension Rod on
the aircraft needs to be maintained and dismantled. Instructions for maintaining the XAG ® RevoSpray
2 before dismantling are as follow:
XAG ® RevoCast 2 System XAG ® RevoSpray 2 System
Cleaning the Liquid Tank:
Pesticides are corrosive which may cause erosion within the equipment and shorten equipment
lifespan, it is recommended to thoroughly clean the aircraft after each operation and before swapping
the Payload System.
01. Refill the Liquid Tank with soap water or soap powder water, and engage all nozzles to drain and
clean out remaining residues within the spray system.
02. Refill the Liquid Tank with clean water, and engage all nozzles to drain and clean out the
remaining soap water within the spray system.
03. Place an empty Liquid Tank, and engage all nozzles to drain and clean out remaining residues
within the spray system to avoid residue leakage during transportation and possibly damaging
other items.
04. Wringing a wet rag, then wipe and clean the exterior of the aircraft and the Liquid Tank to
remove any stains and foreign objects.