Xact Hosted PBX Скачать руководство пользователя страница 18

Страница: 18 / 92

xiv

7.3

Moderator Commands

The following commands can be dialed from your phone during a conference.

Allows you to dial another participant to be brought into the conference. After dialing

dial the participant’s number followed by

Once the participant has answered you can press

to bring them into the conference, or

press

to drop the call and return to the conference.

Mute or un-mute the moderator.

Lock or unlock the conference. When locked no-one else can joint the conference.

Provide a roll-call of participants.

Provide a count of participants.

Selects whether announcements should be made when participants join and leave.

Announces the name of the last person to join the conference.

Turns conference call recording on or off.

Mute or un-mute all participants.

Record a greeting to be played to participants when they join the conference.



You will hear an announcement giving instructions for recording the secondary

greeting.



Press

to start recording. Record the greeting and then press



Press

to hear the recording you have just made.



When you are happy with the new greeting, press

to save it.

This command allows the moderator to leave the conference without the call ending.

Press

to confirm. You may log onto the conference again by following the

instructions to start a conference call.

7.4

Moderator Web Access

When moderating a conference you can use the web interface to view and control the conference. To access

this, follow these steps:

Point a browser at the web conferencing address https://conf.esco-tech.net/

Enter your moderator and participant code.

Select

Submit

Содержание Hosted PBX





























































































Результаты поиска

Содержание Hosted PBX

Отзывы:

Похожие инструкции для Hosted PBX

Бренды по названию

Популярные бренды

Xact Hosted PBX, Руководство пользователя

Результаты поиска

Содержание Hosted PBX

Отзывы:

Похожие инструкции для Hosted PBX

Бренды по названию

Популярные бренды