X - R i t e e X a c t ™ I n s t r u m e n t
52
From this screen you select a standard from the library for viewing. Standards can be selected by
tapping the search icon and entering the name, or by tapping the sort icon and choosing Classic
view or Delta E sorting method to find a standard.
Classic view lists the standards of the current library in the order they were loaded into the
instrument. You can scroll through the list by swiping up or down on the scroll bar.
Delta E view only lists standards that are within 30 dE of the current sample.
Another feature of the search mode is that you can measure a sample at any time. The screen
automatically changes back to Delta E search mode and revises the list for the measures sample.
Note
: If you change the patch during a job with auto patch is active, whatever color was selected
will not remain active.
Change Standard or Patch icon
For the compare and search tools, this icon is used to access the change standard screen where
you can quickly select a different standard that is close in color to the current standard.
For the job tools, this icon is used to access the change patch screen were you can move the last
sample measurement to a different patch selected. This is important in job mode because the last
reading attached to a particular patch will be used as the basis for finding that patch next time it
is measured. If a wrong patch is learned, it could affect how other future patches are detected.
-Tap the color patch icon of the standard or patch you want to select.
-Tap the checkmark icon to select the standard or patch and return to the measurement screen.
Standards
Patches
