X-Rite 939, Руководство оператора

Страница: 74 / 108

I N S T R U M E N T O P E R A T I O N
5-17
Pass/Fail Operation
The Pass/Fail function displays
PASS
or
FAIL
for a sample on
the instrument screen, based on the tolerances assigned to the
standard. A “green” or “red” light also illuminates, indicating
the sample’s acceptability. The Pass/Fail option must be
activated in the Instrument Configuration and tolerances set for
the standard.
To perform a pass/fail measurement:
1.
Select project location (if used) as discussed earlier.
2.
Select the standard location if the auto standard selection is
not activated in configuration. Measure the sample.
P r o j 1 : P R O J E C T A
S t d 2 : S T A N D A R D B
S a m p l e : # 1 1 1 : 2 8
L*a*b*
D65/10
......
....
∆
L* +0.35
∆
a* –0.15
∆
b* +0.15
∆
E 0.41
555 Shade Sort Operation
The 555 Shade Sort function displays a three-digit number for
the sample on the instrument screen, based on the shade size
and shade range. Pass/Fail operation can also be used in
conjunction with Shade Sort if required. The Shade Sort option
must be activated in the Instrument Configuration and the size
and range set for the standard.
To perform a shade sort measurement:
1.
Select the project location (if used) as discussed earlier.
2.
Select standard location if the auto standard selection is not
activated in the configuration. Measure the sample.
P r o j 1 : P R O J E C T A
S t d 2 : S T A N D A R D B
S a m p l e : # 1 1 1 : 2 8
L*a*b*
D65/10
......
....
∆
L* +0.35
∆
a* –0.15
∆
b* +0.15
∆
E 0.41
Shade Sort Out of Range Indication
If an up arrow or a down arrow appears in the place of a shade
sort number, this indicates that the number is out of range. The
way the arrow is pointing indicates the failure direction. An up
arrow indicates above and a down arrow indicates below.
PASS
Acceptance
indication (pass
or fail)
Time stamp for
stored sample
Time stamp for
stored sample
Acceptance
indication with
shade tag
PASS
565