X-Rite 939, Руководство оператора

Страница: 97 / 108

C H A P T E R F I V E
5-40
Run Job
The Run Job function is used to select a job sequence
downloaded from an X-Rite software program such as
X-RiteColor® Master. A typical job would display
measurement prompts on the instrument screen. The instrument
can store a total of 10 jobs at one time.
Refer to the software program for specific information on jobs
and job operation.
To access the Run Job mode:
1.
Use the Tab keys
$@
to highlight
Run Job
.
–
M A I N M E N U
–
↑
C a l i b r a t e
S t a n d a r d s
P r o j e c t s
R u n J o b
C o n f ig u r at io
X — R i t e
9 3 9
— — — — — —
X X X X
* * * * * *
2.
Press the Enter key
#
to access the Pick Job mode.
P i c k J o b #
1 : J o b 1
2 : J o b 2
3 : J o b 3
4 : J o b 4
5 : J o b 5
3.
Use the Tab keys
$@
to highlight the desired job.
Note: <Empty> appears in the display when no jobs are available.
4.
Press the Enter key
#
to activate job sequence.
Available jobs