X-Rite 939, Руководство оператора

Страница: 62 / 108

I N S T R U M E N T O P E R A T I O N
5-5
Entering Standard Name
The standard name can consist of up to 20 characters, with the
first 10 displaying on the View Standard menu. The name is
entered using the alphanumeric editor.
To access standard name menu:
1.
Use the Tab keys
$@
to highlight
Std Name
.
E d i t S t a n d a r d : 1
S t d E n t r y : M e a s u r e d
S t d N a m e :
T o l e r a n c e s . . .
S h a d e S o r t O p t s . . .
S t d L o c k : U n l o c k e d
D e l e t e T h i s S t d . . .
2.
Press the Enter key
#
to access the
Edit Standard
Name
menu.
E d i t S t a n d a r d N a m e
C L E A R
↓
o
↑
Save & Exit
NOTE : To quickly remove a name, highlighting CLEAR and press the
Enter key # .
3.
Use the Tab keys
$@
to highlight the name entry field.
4.
Use the Tab keys
$@
to choose the desired character
location (arrows above and below designate the selection).
Press the Enter key
#
to access the alphanumeric editor.
5.
Press the Enter key
#
again to quickly page through
groups of letters, symbols, and numbers.
6.
Use the Tab keys
$@
to highlight the desired character and
press the Enter
#
key to exit editor.
7.
Continue with additional character edits.
8.
When editing is completed, use the Tab keys
$@
to
highlight
Save & Exit
and press the Enter
#
key.
Setting Tolerance Limits
The tolerance limit is the maximum allowable difference from
the standard color values that is considered acceptable. The
tolerances are used to test your sample’s acceptability by
displaying a pass or fail signal, based on the entered limits. Plus
and minus limits can be set symmetrically or individually for
L*a*b*, L*C*h°, L*u*v*, Lab, RGB, XYZ, and Yxy
Name entry