15
Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
RS232 CONTROL
5
6
7
Next, select an input port in the same Port Select
area - such as input port 2 in this case - and click Write to
save the current EDID to the selected input port.
Wait a few seconds for the process to complete.
Once the writing process is complete, click Save as
to save the EDID as a bin file.
To write previously saved output port EDID in bin
format, click Open File and choose the relevant bin
file before selecting an input port and click Write. It is
recommended this is done often if specific output EDID
from particular display devices are frequently used.
Configuring Advanced Settings
Advanced matrix settings can be configured by clicking
SETTING in the Set Panel Area.
IR Set
The matrix supports leading third party control systems
and learning remotes that learn control from the IR –
see the product page at
wyrestorm.com
for details of
compatible control systems and available protocols. To
access third party control configuration, click IR SET in
the Set Panel area to enter new IR code or modify existing
code and assign to inputs and outputs.
IR Matrix
The IR Matrix allows the creation of different IR paths to
remotely control the IR devices, such as source or display
devices using each device remote control from the matrix
location.
1
2
3
4
1 UTP Long Cable
Mode
In instances where the distance of the cable may be
effecting transmission quality, this setting toggles ON/
OFF to improve display quality.
Click Unlock, enter password 123456 and follow the
on-screen instructions to activate UTP Long Cable
Mode – reboot the matrix for the change to take effect.
2 IR Call Back
Toggles IR call back ON/OFF.
By default, this option is turned ON. IR call back func-
tion only allows remote control of the matrix inputs and
outputs at the display end.
3 Copy EDID Setting
Copies output ports 1~8 EDID to specific input ports
1~8.
4 Factory Reset
Restores the matrix to its initial Default Setting as
shipped.
Reboot the matrix for this setting to take effect.
Warning: This action will erase all previously saved
data/settings – this cannot be undone.
5 Quick Switch
Quick Switch option is an alternative method of
switching between sources that is faster than in Normal
mode, resulting in less delay between input selection.
Although faster, the means of switching has been
found to be incompatible with some displays. As a
result we recommend Normal Switch as the default
setting due to reliability and compatibility with outputs.
5
