Pls eliminate dust and waste ink regular.
Pls do maintenance and add oil regular to guide rail,synchronous belt,steping
synchronous wheel,bearings,feeding and take-up wheels.
The printer and the surrounding working environment must accord with the
requirement for equipment.(Temperature:20-32℃,Humidity:40-60%),and the
surroundings should not have the equipments which have strong magnetic field and
may cause a lot of dust.
Keep printer clean,operator should do normal cleaning work.( raster, wiper and
purge pad need to be cleaned frequently)
In process of using,you have to keep platform clean without foreign matter to
avoid scratching the surface of print head.
Ink cartridges should be well covered after adding ink ,to prevent dust or other
foreign matter fall into it and cause ink blocking.
Eco-solvent ink can't be mixed with water. Otherwise,it will cause chemical
reaction and generate sediment ,which can block the print head.
Operate printer strictly according to our operation instruction, otherwise, it may
cause unnecessary loss.
When add ink,ink cartridge should not be taken out ,to prevent parts inside broken
because of frequent plugging and taking out ,and cause unnecessary loss.
Install print head baffle plate firstly when removing the printer.
Printhead maintenance
To keep normal working situation of printer and make sure its constant and high-quality
output, daily maintenance is a necessary step.
1
2
3
4
5
6
7
8
9
10
36
