18
Before printing, set the print base point position, use [ ] and [ ]to set the
carrier position,then press [
BASE POINT
] to set the carrier’s start position, also
coordinates of its position will be displayed on the screen.
4.Operation preparation
BP 0mm BI
H 0mm (R)
Base point
base point value
Bidirectional printing
5.Start point setting
NOTICE
First set carrier’s position with left and
right key.
Then press[BASE POINT] to set start
position.
Left
Right
BASE POINT
Height value
Media type
Height
Media type： R ROLL
B BOARD
When turn on, screen will display interface:
6.Menu bar main function
MEDIA TYPE
Media type：ROLL
BOARD
SHEET TYPE
Sheet type：OPEN
OPAQUE
HEAD1-HEAD2
Horizontal distance calibration between two print heads.
HEAD ADJUST
Horizontal and vertical calibration of print head.
PARAM SETTING
Parameter setting and save: Save and record software parameter. Reinstall
software or change computer, it can restore the saved date directly.
Parameter saved：Ver Time： Year/month/date
Load Param RESET SOFTWARE
Save Param
