7.
Go back to step 2, take a test printing.
8.
Check the result of the test print on the left and select a value without
bias, in this case without deviation value is“0”.
Test result
9.
Press [ ] to enter L_ADJUST interface for slight adjustment.
BIDIRECTION---------1
L_ADJUST 3/8
10.
Use[ ]and[ ]key to change value of step 8 and press [ENTER] to confirm.
BIDIRECTION-------1
L_ADJUST 0/8
ENTER
Current value
No deviation value
7 6 5 4 3 2 1 0
10 9 8 7 6 5 4 3
2 1 +0- 1 2 3
4 5 6 7 8 9 10
6.
Press[ ] [ ]to add step 4 selected value to the step 5 value, then press [ ENTER ]
to confirm and exit interface at the same time.
ENTER
BIDIRECTION-------1
ADJUST +7
BIDIRECTION-------1
ADJUST +9
Press[ ]and[ ]to adjust
value.
11.
Press [ ] twice to back step 1 interface, continue ADJUSTMENT MODE 2, MODE
3 and MODE H, the calibration method is the same as MODE 1.
25
