wtw Turb 555, Руководство по эксплуатации

Страница: 53 / 82

Turb 555 / Turb 555 IR Operation
53 ba41113e07 04/2009
Setting the baud
rate
To select the baud rate proceed as follows:
Calibration interval In the following menu, you can select the calibration interval
(INT is displayed in the lower display line).
Note
When the calibration interval has not expired and the code
function is activated, all measured values output to the print-
er/PC are given the "QC" (Quality Control) identifier (see
section 4.6.2 O
UTPUT OF MEASURED VALUES
). When you
have exceeded the calibration interval, you can continue to
measure. In this case, the measured values are output with-
out the "QC" identifier.
To set the calibration interval, proceed as follows:
24 With the
8
or
2
key select the required baud rate.
Options: 1200 -> 2400 -> 4800 -> 9600
25 Confirm your selection with
1
.