WTC DEP-100S, Руководство по программированию

Страница: 32 / 62

@b_WbQ]=_TU
"!" 45@! C4QdQ5^dbi@Q^U\
BUfYUgCUde`@QbQ]UdUbc
WTC weld controls use a number of programmable settings,
called set-up parameters, to enable you to customize a weld
control to meet your application requirements.
The set-up parameters tell the control about its operating
environment: how to react to certain conditions (as FAULT or
ALERT conditions), the hardware used (such as the type of
transformer and the transformer turns ratio), the range of
primary and secondary current to expect and how to react when
certain inputs become active.
Every device has a unique set of parameters. Refer to the
Operator’s Manual provided with the weld device for more
information.
Warning!
The weld device will ignore changes to certain set-up
parameters (such as those controlling retract operation)
until power to the device is cycled (turned off and then
back on).
Because these settings control operation of the weld
device, extreme care should be exercised before making
changes to set-up parameters!
3
81>79>7
@
1B1=5D5B
C
5DD9>7C
When you press from the Program Mode display menu,
you’re selecting the Review Setup display, which is used to see or
change the current settings for a weld control’s set-up
parameters.