WTC DEP-100S, Руководство по программированию

Страница: 9 / 62

45@! C4QdQ5^dbi@Q^U\ !!
?fUbfYUg_VdXU45@! C !
The WTC DEP-100S data entry panel is a compact programming
device. It can communicate with up to 30 WTC weld devices through
the MedLAN network.
The DEP-100S allows you to program weld schedules, set-up
parameters and a stepper profile, then download the information to
the weld control unit. It also receives weld summary data uploaded by
the weld control and displays weld results.
When power is applied to the DEP, it polls the MedLAN network to
determine the active devices. Each active device responds with
information about its software and features:
• Software version, revisions and any unique control
characteristics
• Current weld schedules
• Stepper programs, stepper type(s) and their assignments to
weld schedules
• Set-up parameter settings
• Control fault and event status
Each weld control functions independently. The data displayed by the
DEP-100S for each device varies, based on its software and features.
For example, some software versions provide two types of steppers:
the conventional linear stepper and a WTC SureWeld stepper. Other
versions provide only the linear stepper. The stepper displays you will
see (when programming the stepper for a weld control) are based on
the software in the weld control.
This manual provides sample displays typical of the information
you’ll see. However, the actual display will depend on the capabilities
of the weld control software.