WTC DEP-100S, Руководство по программированию

Страница: 33 / 62

@b_WbQ]=_TU
45@! C4QdQ5^dbi@Q^U\ "!#
You’ll use a display similar to the one below to review the
parameter settings.
The last line of the display tells you that you can press to see
parameters for another weld control or download the new
settings to a weld control by pressing
. (To return to the
Program Mode display, press .)
To change the set-up parameters for the selected control, use the
W
and
E
keys to move the cursor to the parameter you want to
change.
• If the parameter is a word, press the
O
or
U
key to
change the selection. Press these keys until you see the
correct parameter status.
• If the parameter is a number (such as HIGH
CURRENT LIMIT: nnn0), press
-
, enter the new
value and press
-
again.
4
?G><?14
@
1B1=5D5B
C
5DD9>7C
When you have defined all of the set-up parameters, press to
download your changes to the WCU.
Select the weld control you want to receive the data and press
-
. (You can download the same parameter settings to more
than one weld control.)
The new parameter settings do not take effect at the weld control
until you download your changes.
88D" 3?==?>
CD1BD?6C5DE@
O9>F1<94C5AE5>35C5<53D54*61E<D
G5<49>9D91D5>?D@B5C5>D*1<5BD
gSe T_g^\_QTUhYd
6!6"6#6$