WTC DEP-100S, Руководство по программированию

Страница: 34 / 62

@b_WbQ]=_TU
"!$ 45@! C4QdQ5^dbi@Q^U\
BU\_QT4UVQe\dc
Each control stores default values for every programmable
setting. These values (stored in the EPROM in the weld control
are the ones the WCU will use until the settings are changed,
either through the WCU programming panel or using the DEP-
100S .
The Reload Defaults option allows you to reset the control to a
“known” condition. When you reload the default values, the
stepper, set-up parameters and all of the weld schedules revert to
their default values.
When you press on the Program Mode display, you’ll see a
prompt asking you to enter the number of the weld device you
want to reload. Select the WCU number and then press
-
.
Note:
If the weld control stores more than one version of defaults
(such as for a robot, machine, seam, spot, or portable
gun), you may see another menu, asking you to select
which set of default you want to reload. Select from the
menu and press
5
.
<
?14
4
561E<D
When you press
-
, you’ll see the following warning, to alert
you that reloading the default settings will erase all of the
programming changes made from the DEP-100S , and reset all
programmable values to those stored in the EPROM.
• If you want to Continue, press
. The system
reloads the selected WCU from EPROM memory, then
returns you to the Program Mode display.
88D" 3?==?>
G1B>9>7
1<<@B?7B1==5441D1G9<<25?F5BGB9DD5>
3?>D9>E512?BD
6!6"6#6$