WTC DEP-100S, Руководство по программированию

Страница: 31 / 62

@b_WbQ]=_TU
45@! C4QdQ5^dbi@Q^U\ "!!
Note:
(This manual does not describe or define the SureWeld
parameters. Refer to the Operator’s Manual provided
with your weld control unit for more information on these
parameters and how they impact stepper operation.)
3XQ^WY^WdXUCebUGU\TCdU``Ub@b_VY\U
When you press on the number keypad to select the Review
SureWeld Stepper, a display similar to the one below allows you
to program the values for the SureWeld Stepper:
Programming these values is similar to programming a weld
schedule: use the
W
and
E
keys to select the parameter you
want to change. When the cursor is on the correct parameter is
parameter, you can change the setting by entering the new value
and pressing
-
.
• To select a different weld control for display, press
and enter the new wcu # number.
• To select a different stepper number for display, press
and enter the new stpr #.
• To download your changes to the weld control, press
. (Changes must be downloaded to take effect.)
- Enter the WCU number to receive the new data
and press
-
. The prompt asks you to enter the
number of the stepper you want to receive the
new data.
- Enter the correct stepper number and press
-
.
• To exit without changing data at the WCU and to
return to the Review Stepper menu, press .
88D" 3?==?>
CD1BD?6CD5@@5B
O9>38D9?>))G5<4CG?5H@E<C9?>
4538D9?>)G5<4CG9D85H@E<C9?>
gSe cd`b !T_g^\_QTUhYd
6!6"6#6$