Worldwel Longrun 25CA, Руководство по эксплуатации

Страница: 28 / 65

The capacity of hopper is about 12 liters and the rectangular shaped
figure at the top is used to eliminate slag in the net of 4 meshes. The
hopper and the zinc rock and the gap between the tack welding rod is
insulated, thus safe. Look at the component list for further information
about hopper assembly.
4-11. 주행장치 어셈블리
Traveling device assembly
1) 주행전동기 Travel electromotor
주행전동기는 감속장치에 설치되며 제어장치에 의해 구동제어가 되는 타
려자 직류전동기이다. 제어회로는 모드 콘트롤 박스에 들어가며 주행의
개시, 정지, 주행방향의 교체는 레버로 행한다.
The travel electromotor is installed in a decelerator, and it is a
separately excited generator controlled and operated by a controller.
The control circuit is inside the mode control box and the starting,
stopping, and changing direction of travels are done by lever.
방 식
Method
DC Motor
출 력
Output
150W
전기자
Armature
80V(90V) 1.2A
계 자
Field
80V(90V) 0.14A
회전수
Number of Rotations
6,000 r.p.m (3,000 r.p.m)
주행방향
Traveling of Rotation
전진 / 후진
Forward / Reverse
정 격
Rating
연속
Continuous
[ 전동기 사양 ]
Specification of the electromotor