Worldwel Longrun 25CA, Руководство по эксплуатации

Страница: 13 / 65

and the round shape between the wire and the parent metal until it is
pushed as much as slightly pressing the tip of wire.
Open the flux hopper valve to diffuse flux around the wire, and the
welding preparation is complete.
1) Beginning of the welding
① Lay the travel direction lever to the forward direction of welding.
② Switch on the 'SW, S2, S3' for welding selection.
③ Press the PB5(START).
④ Traveling is processed when the ARC generated.
2) During the welding
① Turn the ARC voltage adjustment volume (WVC) up and down to
adjust it to an appropriate ARC voltage. Also, press the current
adjusting button switch (CURRENT) PB3(+) PB4(-) to set a desirable
welding current.
※ The DC is adjusted with a volume.
3) Finishing the welding
Press the PB6(STOP) to finish welding
Please use the following picture as a reference to control order.