Worldwel Longrun 25CA, Руководство по эксплуатации

Страница: 35 / 65

Command the backing welding current.
24) Precision welding seam tacker (PWST)
There is a device where a weldment is automatically located.
(Look at the appendix manual.)
25) Front power fuse (FPF)
Check the overflow of current in the preceding transmitting motor
control circuit.
26) Front wire inching speed control volume (FWISCV)
Adjust the up/down inching velocity of the preceding wire.
27) Rear power fuse (RPF)
Check the overflow of current in the backing transmitting motor
control circuit.
28) Rear wire inching speed control volume (RWISCV)
Adjust the up/down inching velocity of the backing wire.
29) Travel power fuse (TPF)
Check the overflow of current in the preceding distance control
circuit.
30) AC 110V Plug
There is the AC 110V plug cord
31) Emergency stop switch
Running is stopped when the stopping is needed to pause the
abnormal moving.