WORLD OF MEDICINE A127, Инструкция по эксплуатации

Страница: 40 / 62

Care and Maintenance
40 / 62
It is imperative to comply with the concentrations, temperatures, and exposure
times, as well as the post-rinsing requirements specified by the manufacturer of
the cleaning agent and/or disinfectant.
Make sure that the entire tube set is rinsed and dried. If necessary, rinse or dry the
tube set both from the Luer lock side and from the side of the spikes.
Never clean the product with metal brushes or steel wool but with a soft cloth.
Rinse aids and / or acid neutralizers are not permitted.
The product shall not be exposed to temperatures exceeding 142 °C (288 °F)!
Instrument oils or greases must not be used to used to maintain the product.
Workflow Automated reprocessing
Automated
cleaning /
disinfection
Membrane
removal
Pretreatment
Visual
inspection If necessary,
post driying
Reinstalling
the
membrane
Packaging
Sterilization Storage
Manual reprocessing
Manual
cleaning
Membrane
removal
Pretreatment
Manual
disinfection
Reinstalling
the membrane
Packaging Sterilization Storage
If necessary,
post drying
Visual
inspection Visual
inspection
9.5.2 Reprocessing
9.5.2.1 Preparation
WARNING!
Membrane
Remove the membrane before cleaning.
Removing the membrane from the
product 1. Before cleaning: Carefully remove the membrane
(2)
from the pressure cham-
ber
(1)
(see Fig. Pressure chamber membrane and its position in the inflow
tube set [
}
41]). This is done by pulling the strap of the membrane
(6)
to-
wards the top. Make sure not to damage the membrane. Damaged mem-
branes must be replaced.
2. Before starting sterilization, the membrane must be reattached to the pres-
sure chamber according to the instructions in Chapter Reinstalling the Mem-
brane [
} 44].
en