WORLD OF MEDICINE A127, Инструкция по эксплуатации

Страница: 27 / 62

Operating the Device
27 / 62
Fig. 5–5 Inserting tube set
(2)
Spikes
(5) Inflow tube
(7)
Roller tube
(8)
Pressure chamber with mem-
brane and transponder
(9)
Instrument tube
(10)
Luer lock connector
(11)
Irrigation fluid bags
(12)
Roller wheel
(13) Tube retainer
(2)
(5)
(7)
(8)
(11)
(9)
(10)
(13)
(12)
Open outer packaging 1a. Disposable tube set - To be carried out by non-sterile technician:
• Open outer packaging of the tube set.
• A sterile technician then removes the inner tube set package and opens it.
Open sterile autoclavable container 1b. Reusable tube set (NOT FOR SALE IN USA) - To be carried out by non-sterile tech-
nician:
• Open the sterile autoclavable container of the tube set.
• A sterile technician then removes the tube set from the inside of the package.
Connecting the instrument 2. To be carried out by sterile technician:
• Keep the Luer lock connector
(10)
in the sterile area and hand the tube end
with the spikes
(2)
to the non-sterile technician (see Fig. Inserting tube set
[
}
27]).
• Connect the Luer lock connector
(10)
with the instrument (inflow). Open in-
flow valve of the instrument.
Inserting the tube set 3. To be carried out by non-sterile technician:
• Switch device on. Insert the tube set. Inserting the roller tube is depicted in Fig.
Position roller tube [ } 28].
• Place the roller tube
(7)
around the roller wheel
(12)
.
• When inserting the roller tube, make sure not to damage the membranes of
the pressure chamber. Insert the pressure chamber
(8)
only if chamber is not
pressurized.
• Carefully insert the unpressurized pressure chamber
(8)
into the lower notch
of the tube retainer (13) up to the stop.
• Connect the fluid bags (see Chapter Connecting the Irrigation Fluid Bags
[
}
28]).
en