12. MAIN MENU (SETTINGS)
12.3 MODES
MODES submenu allows you to switch between the available screen layout op ons, set the CWSI image opacity,
switch which camera is the primary, manually set the zoom level of the primary camera and to set the visible
image green segmenta on level.
LAYOUT - cycles between the available layout modes (DUALSCREEN, FULLSCREEN RGB and PIP FUSION).
CWSI OPACITY - Opacity of CWSI camera image in PiP Fusion mode
MAIN CAMERA - toggle which camera (CWSI or visible) is displayed as the primary (main) screen and which
is in the secondary (preview) screen.
ZOOM - set the zoom value on the main camera (physical zoom on the visible spectrum camera, digital
zoom on the CWSI camera).
ZOOM SIMULTANEOUSLY - Zoom both cameras simultaneously.
SEGMENTATION - Set visible camera green segmenta on lter level. All non-green pixels will be white.
Use this to highlight the crops.
Figure 12.3 – MODES se ngs
Note
: Zoom level set for the camera in primary screen will be maintained for the same camera type once
it’s toggled into the secondary screen.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.0.0 EN, 25
th
Oct, 2019
All pictures are only for illustra on.
Real values may vary.
38
