7. SYSTEM ASSEMBLY
The MicroSD card should be recognized by the device even if inserted with the system already running. The
MicroSD card should only be removed with the device either unpowered, or a er the SD card is manually un-
mounted in the Memory menu.
7.7 Power Supply
The Workswell WIRIS Agro system can be powered through a +9 to +36 VDC connector on the back panel. The
back panel DC connector is compa ble with a 5.5 mm/OD (outer diameter) and 2.5 mm/ID (inner diameter) plug,
where the inner contact is +9 to +36 VDC and the shell is GND.
Figure 7.7 – Inner power pinout, form of the common cable.
The standard package contains appropriate 5.5x2.5mm coaxial connector with a cable (length of 80 cm).
Warning
: Failure to follow these instruc ons could damage the system
7.8 Turning the System OFF
To turn the system o , simply unplug the power supply.
7.9 Focusing the CWSI Camera
The CWSI camera has adjustable focus. The focus can be set using the focus tool. Note that the depicted focus
tool is not part of standard accessories and is sold separately.
Warning
: The WIRIS Agro camera is focused to in nity during manufacturing and in most cases should
never need adjustments. Considering the delicate nature of the op cs
it is be er to not a empt removal
of protec ve glass or adjustment of the focus lens unless absolutely necessary.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.0.0 EN, 25
th
Oct, 2019
All pictures are only for illustra on.
Real values may vary.
16
