![WORKSWELL WIRIS Agro Скачать руководство пользователя страница 28](http://html.mh-extra.com/html/workswell/wiris-agro/wiris-agro_user-manual_997410028.webp)
9. GPS AND MAVLINK
MAVLINK_MSG_ID_COMMAND_LONG
WIRIS Agro supports the following MAVLink commands:
MAV_CMD_REQUEST_CAMERA_INFORMATION
MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS
MAV_CMD_IMAGE_START_CAPTURE
MAV_CMD_IMAGE_STOP_CAPTURE
MAV_CMD_VIDEO_START_CAPTURE
MAV_CMD_VIDEO_STOP_CAPTURE
To connect an autopilot to WIRIS Agro, please do the following:
1. Set your autopilot to send messages and commands with UART at 57600 bps
2. Crimp the autopilot cables and insert them into the empty Molex connector
3. Connect the autopilot to WIRIS Agro
Figure 9.3 – QGroundControl se ngs for Pixhawk autopilot.
For example, using the Pixhawk 4 autopilot, set the TELEM2 interface as Companion Link or Normal Telemetry.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.0.0 EN, 25
th
Oct, 2019
All pictures are only for illustra on.
Real values may vary.
27