WORKMASTER GO-B3, Руководство оператора

Страница: 14 / 28

9
PH: 866.476.9217
VI. OPENING CAR GATES
1. Inspect and prepare the trackside worksite so that it will
accommodate the practical and safe use of the GO-B3 Gate
Opener and its Torque Reaction Arm.
2. Inspect the Slide Gate’s Capstan Socket to make sure the Drive
Fitting can make a good, square, secure-fit in the Socket. If the
Capstan Socket is worn (out of square, completely rounded out,
etc.) use either a
WORKMASTER
Capstan Swaging Kit
(PN 33-
11120) to clean out and square-up the Capstan Socket, or, if
completely rounded out, a WORKMASTER Capstan Renew
Attachment
(PN: 80-10728),
which slides over and is pinned to
the Capstan Socket and provides the Drive Fitting the required,
well-formed, female square drive. (See Back Cover)
3. Disengage the car gate locking mechanism before attempting to
open the gate.
A clean, square Capstan Socket will maximize
the torque transfer between the GO-B3 Opener
and the car gate.
IMPORTANT
Failure to disengage the car gate locking
mechanism will damage the Gate Opener.
CAUTION
The surface of the unloading site in the area of the
hopper car gate must be level, flat, smooth, and
unobstructed so as to provide the firm base which will
safely support the
GO-B3
's Torque Reaction Arm.
CAUTION