15
PH: 866.476.9217
6.
To rotate the Drive Fitting clockwise (Operator’s perspective), push
the Selector Switch into the CW position.
(See Figure 4, Item 1,
Page 10)
7.
To rotate the Drive Fitting counter-clockwise (Operator’s
perspective), push the Selector Switch into the CCW position.
(See Figure 4, Item 2, Page 10)
8.
Depress and hold the Opener’s On/Off Trigger.
9.
If the railcar gate will not move, STOP using the
GO-B3
Opener,
and notify your Supervisor. Continued application of force will
damage the Opener.
Maintain firm hand control of the
GO-B3
Opener’s
handle during entire opening operation. Uncontrolled
use could cause sudden release of stored torque
causing the
GO-B3
to spin in the reverse direction
which could result in serious injury.
Since reaction torque equals output torque,
be sure to select an anchor point or stationary
base which is sufficient to withstand the torque
reaction forces imposed upon the Torque
Reaction Arm.
When positioning the
GO-B3
, be sure the Capstan
Drive Fitting is positioned so that the Torque
Reaction Arm is
NO GREATER
than a 45° angle
to the car's Capstan Socket. Torque reaction
creates a rotational force in the opposite direction
from which input force is applied.
IMPORTANT
Содержание GO-B3
