6
PH: 866.476.9217
IV. PRE-START CHECKLIST
The assembly of the
GO-B3
components can be accomplished within 5 minutes
and requires no special tools.
1.
Attach the Torque Reaction Arm onto the Opener.
a.
Remove the Socket Head Shoulder Bolt (SHSB) from the
Reaction Arm using the 1/8” Hex Key.
b.
Slide the Torque Reaction Arm over the front of Opener.
c.
Re-install the SHSB to finger tight and then tighten with
provided 1/8” Hex Key.
(See Figure 1)
NOTE:
The SHSB can only be installed in one direction.
Figure 1: Socket Head Shoulder Bolt Install
2.
Attach Capstan Drive Fitting onto Opener.
a.
The 1” Female Square Socket slides onto the Opener’s 1” Male
Square Drive.
b.
Secure the Drive Fitting to the Opener with the supplied one-
piece Pin & Ring Retainer (Ret-Ring).
(See Figure 2, Page 7)
Содержание GO-B3
