12
PH: 866.476.9217
6.
To rotate the Drive Fitting clockwise (Operator’s perspective), push
the Selector Switch into the CW position.
(See Figure 4, Item 1,
page 10)
7.
To rotate the Drive Fitting counter-clockwise (Operator’s
perspective), push the Selector Switch into the CCW position.
(See Figure 4, Item 2, on page 10)
8.
Depress and hold the Opener’s On/Off Trigger.
9.
If the railcar gate will not move, STOP using the
GO-B3
Opener,
and notify your Supervisor. Continued application of force will
damage the Opener.
10.
When the railcar gate is completely opened, release the On/Off
Trigger.
11.
Release the stored torque in the
GO-B3
Opener by pushing the
Selector Switch to the opposite direction, for example: from CW to
CCW, then momentarily depress the On/Off Trigger until Torque
Reaction Arm relaxes off the ground.
Do not use other opening devices (pry bars,
come-a-longs, etc) in an attempt to "help" the
GO-B3
Opener.
Maintain firm hand control of the
GO-B3
Opener’s
handle during entire opening operation. Uncontrolled
use could cause sudden release of stored torque
causing the
GO-B3
to spin in the reverse direction
which could result in serious injury.
Stop applying force the moment the gate reaches
its fully opened position. Prolonged ratcheting can
cause damage to the Gate Opener.
CAUTION
Содержание GO-B3
