WORKMASTER GO-B3, Руководство оператора

Страница: 9 / 28

4
PH: 866.476.9217
III. SUPPLIED MATERIALS
Perform the following unpacking and pre-installation procedures prior to
preparing the Opener for operation. Contact WORKMASTER or your Regional
Distributor if you have questions or problems.
1. Shown below are the items supplied with your GO-B3 Gate
Opener. Verify that you received all the items listed below and
inspect all items for signs of damage.
The
GO-B3
is shipped with its basic components unassembled. The items
supplied include:
(A) GO-B3
Battery Powered Hopper Car Gate Opener.
(B) Capstan Drive Fitting. The Drive Fitting has a socket on one end, which
slides onto the Opener’s 1" output drive, and a drive tip on the opposite
end, that is inserted into the railcar gates Capstan Socket. The Drive
Fitting is supplied with a 1-piece Pin & Ring Retainer.
A
B
D
H
E
F
G
I
C