17
PH: 866.476.9217
VIII. MAINTENANCE & BEST PRACTICES
GENERAL MAINTENANCE
1.
Maintain the Gate Opener. Check for misalignment or binding of moving
parts, breakage of parts, and any other condition that may affect the
Opener’s operation. If damaged, have the
GO-B3
repaired before use.
(Accidents are caused by poorly maintained equipment.)
TORQUE OUTPUT THROUGH THE LIFE OF THE BATTERY
Although the torque should be consistent until the last few Openings/Closings
before the Battery discharges. Change the Battery before the charge drops to
25% battery life.
CHANGING ACCESSORIES
1.
Remove the
GO-B3
Opener from the Hopper Car’s Capstan Socket.
2.
Disconnect the Battery to the
GO-B3
Gate Opener.
3.
Remove the Drive Fitting by disengaging the Ret-Ring.
4.
When re-installing the Drive Fitting make sure it is properly secured to the
Opener’s square drive by using the supplied Ret-Ring.
BATTERY SAFETY, USE, AND CAUSE INSTRUCTIONS
1.
Do not expose
GO-B3
Opener to rain or wet conditions. Water
entering the Battery will increase the risk of electric shock and/or
damage the Opener.
2.
Disconnect the Battery from the Opener before changing
accessories or storing the Gate Opener. This will reduce the risk of
starting the
GO-B3
accidentally and, also, provide an opportunity
to charge the Battery for next use.
3.
Recharge the Battery only with the Charger supplied by
WORKMASTER
. A Charger that is suitable for one type of battery
may create a risk of fire when used with another battery.
Содержание GO-B3
