Worcraft WCE-2816 S, Инструкция по эксплуатации

Страница: 66 / 76

Do not throw away with the normal household waste. Instead, turn to recycling centers in an
environmentally friendly way. Please take care to protect the environment.
The product complies with the applicable European directives and the method of assessing
the conformity of these directives has been performed.
Wear safety glasses.
Wear protective gloves.
Wear ear protection.
When performing repairs, the machine must not be plugged into an electrical outlet.
Wear a respirator.
When working, you must operate the chain saw with both hands.
Double insulation protection II. No grounding is required.
Do not work in the rain or leave the device outside when it is raining.
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS
- WARNING! Read the safety warnings, instructions, illustrations and specifications provided with this
power tool. Failure to follow all instructions below may result in electric shock, fire and / or serious injury.
1) WORKPLACE SAFETY:
- The workplace must be kept clean and well lit. Clutter and dark spaces are often the cause of accidents.
- Do not use power tools in potentially explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Sparks in the power tool may ignite the dust or fumes.
- Keep children and other persons away from the power tool when using it. If you are disturbed, you may
lose control of your activity.
2) ELECTRICAL SAFETY:
- The plug of the power tool must match the mains socket. Never modify the power cord in any way. Never
connect a tool that has a safety pin to the power cord plug with splitters or other adapters. Undamaged plugs
and matching outlets will reduce the risk of electric shock. Damaged or tangled power cords increase the risk
of electric shock. If the mains cord is damaged, it must be replaced by a special mains cord available from
the manufacturer or his authorized representative.
- The operator must not touch grounded objects, such as pipes, central heating body, stoves and refrigerators.
The risk of electric shock is greater if your body is connected to the ground.
- Do not expose power tools to rain, moisture or water. Never touch the power tool with wet hands. Never
wash power tools under running water or immerse them in water.
- The cable must not be overloaded. Never use the cord to carry, pull or pull the power tool plug. The cable
must not be exposed to heat, oil, sharp edges or moving parts. Damaged or tangled cords increase the risk
of electric shock.
- Never work with tools that have a damaged power cord or plug, or have fallen to the ground and are
damaged in any way.
- When using the power tool outdoors, use an extension cord suitable for outdoor use. Using a cord suitable
for outdoor use reduces the risk of electric shock
- If you use the power tool in humid areas, use a RCD-protected power supply. The use of an RCD reduces
the risk of electric shock. The term "RCD" may be replaced by "main circuit breaker (GFCI)" or "leakage circuit
breaker (ELCB)".