Emergency Stop pull wire magnetic switch (3)
Caution – Possible danger of injury or damage.
Refer to "Chapter 4 - Operation - Emergency Stop systems"
The magnet must be properly positioned on the required field (3) !
Switching the treadmill ON
After you have powered up the treadmill with the main ON/OFF switch located under the right side (as viewed
from the running direction), activate the treadmill by pressing the Standby button (2). To stop the treadmill, please
use the “Stop” button on the handrail-mounted keypad or press the corresponding field on the touch screen.
After switching ON, the following image appears on the touch screen for a few seconds:
Then the following display (
Main Menu
) appears automatically:
