6
4. Transportation
Caution – Possible danger of injury or damage.
The treadmill is heavy and can cause injury when raised using improper lifting techniques.
Panels, rails and control panel should never be used for lifting or pulling the system.
If the system must be repositioned, use the lifting bars that were delivered with it. Insert them into the openings
designed for this purpose located at the four corners of the system (refer to the drawing in
“Chapter 5 –
Introduction to the LokoStation PPS
”).
If a flat trolley is available, position it underneath the treadmill and then move the treadmill to the desired new
location.
If the treadmill must be disassembled, the panels and rails can be removed for ease of transportation (refer to
"
Chapter 8 - Troubleshooting
").
During transportation and for storage up to 15 weeks, the following storage conditions apply:
Temperature:
+10° C to +70° C
Relative humidity:
15% to 85% none condensing
Air pressure:
700hPa to 1060hPa
Storage allowed in enclosed and/or roofed-over spaces only.
Prior to starting up the slat-belt treadmill, it should be acclimatized for at least three hours at the point of delivery
or in a room with ambient conditions like those of the room where it will be installed (refer to "Chapter 3.1 -
Installation").
