1.3.3
Protective Equipment And Tools
Protective gear
Personal protective equipment serves to protect risks to the safety and health of persons
as well as to protect delicate components during work.
Certain tasks presented in this manual require the personnel to wear protective
equipment. Specific required equipment is listed in each individual set of instructions.
The cumulative required personal protective equipment is detailed below:
Protective equipment: ESD wrist band
The ESD (electrostatic discharge) wrist band keeps the user's body set to ground
potential. This measure protects sensitive electronic components from damage due to
electrostatic discharge.
Tools
Use of the proper tools ensures successful and safe execution of tasks presented in this
manual.
Specific required tools are listed in each individual set of instructions.
The cumulative required tools are detailed below:
1.3.4
Intended Use
The genset control unit has been designed and constructed solely for the intended use
described in this manual.
The easYgen-... devices are available in two different enclosures. They are designed to be
installed either on the back plate of a switch gear cabinet (e.g. easYgen-x100.../...-
x400...) or on the front plate of a switch gear panel (e.g. easYgen-x200.../...-x500...).The
terminals are always located on the inner side of the housing.
The genset control unit must be used exclusively for engine-generator system management
applications.
• Intended use requires operation of the control unit within the specifications listed in the "Technical
•
Data".
• All permissible applications are outlined in the "Application Modes".
•
• Intended use also includes compliance with all instructions and safety notes presented in this manual.
•
• Any use which exceeds or differs from the intended use shall be considered improper use!
•
• No claims of any kind for damage will be entertained if such claims result from improper use.
•
15
easYgen-3000XT Series
37595
1 General Information
1.3.3 Protective Equipment And Tools
