ID
Parameter
CL
Setting range
[Default]
Description
overexcited) and
capacitive/leading
(generator underexcited)
reactive power.
This setpoint is active only
in mains parallel operation.
Notes
Original parameter 5620 is
still present as visualization
value in the controller.
7984
7989
7994
7999
Int. kvar setpoint
1
2
-99999.9 to +99999.9
[0.0]
This setpoint is active only
if PF/kvar setpoint 1 is set
to Mns. Export kvar, Mns.
Import kvar or Gen.kvar.
Notes
Original parameter 5745 is
still present as visualization
value in the controller.
7454
7455
7456
7457
Application mode
2
The unit may be configured
to different application
modes. The discrete inputs
and relay outputs are pre-
defined dependent upon
the selected application
mode. Only the screens
and functions that pertain
to the application mode
selected are displayed. The
single line diagram in the
main screen will change.
Refer to 'Chapter:
Application' in
easYgen-3000XT manual
for additional information.
None
Application mode
A01
The control unit will
function as an engine start/
stop control with generator
and engine protection. All
necessary inputs and
outputs are assigned and
pre-defined.
GCB open
Application mode
A02
32
easYgen-3000XT Series
37595
2 Additional Functionality
2.1.1 Switchable Parameter Sets
