BA_WP_SPM2-1000_EN_28-22.docx
51
19.10
Taking the Machine out of Operation / Storage
•
When putting the machine out of operation, switch off the electrical system.
•
If the machine will not be used for a long time, clean the machine carefully after switching off the electrical
system and treat the worktable and the other bare parts with an anti-corrosion agent.
•
The machine must not be stored in a damp room and must be protected against the effects of the weather.
19.11
Defects and their Remedy
•
In case of defects and pending repair work, switch off the machine, lock the main switch and disconnect the
machine from the mains by pulling out the supply plug. Attach an appropriate sign, e.g. "Defect / Repair
Work", to the machine so that it is clearly visible.
19.12
Average Situations / Emergencies
•
In case of flooding of the work area, switch off the power supply immediately!
•
In case of fire, immediately switch off the power supply and use a class A fire extinguisher.
Alternatively, fight the fire with a fire blanket. If the power cannot be switched off, you
need a class C powder extinguisher.
•
Never extinguish burning electrical equipment with water!
•
Before the machine is put back into operation, it must be checked by a trained and approved
technician.
•
The working area around the machine (see section
5.3) always be clear.
•
The machine must not be used in potentially explosive atmospheres!
