BA_WP_SPM2-1000_EN_28-22.docx
10
3.5
Accident Prevention
To avoid accidents, the following rules must be observed for operation:
•
Prevent unauthorized persons from gaining access to the machine.
•
Keep unauthorized persons away from the danger areas.
•
Repeatedly inform present other persons about existing residual risks (refer to section
•
Conduct and record regular training & instruction for persons who must be in the area of the machine.
•
New employees must be trained internally to work on a thickener and this training must be documented.
3.6
General Safety Regulations
In general, the following safety regulations and obligations apply when handling the machine:
•
A tilting spindle moulder may only be operated in a technically perfect and clean condition.
•
It is prohibited to remove, modify or bypass any protective, safety or monitoring equipment.
•
It is forbidden to modify or alter the machine without the written approval of the manufacturer / supplier.
•
Faults or damage must be reported to the operator immediately, eliminated without delay and repaired if
necessary.
•
For repairs, only original spare parts may be used.
•
All protective, safety and monitoring devices must be regularly checked and maintained by the operator.
•
Only instructed, trained or qualified persons may work on this machine.
•
Maintenance work must be carried out and documented in accordance with the maintenance instruc-
tions.
•
After maintenance or repair, the machine may only be started with all protective devices fitted. A respon-
sible person must be defined for this purpose, who checks that the guards have been properly installed.
•
For the operation of a tilting spindle moulder, the respective national safety regulations for employees as
well as the national safety and accident prevention regulations apply.
