4.4 INSTALL OF LOOSE PARTS - INTRODUCTION
A few elements will be disassembled from the machine main structure due to packaging and shipping requirements.
These loose parts should be installed as follows.
WARNING
Please tighten all bolts and nuts absolutely. Otherwise, may cause machine wobble or serious injury to the operator or
other persons.
-12-
A
Fixing to the floor
The machine must be fixed to the floor.
-Use bolt/nut A to level the feet to ensure machine is well
located.
-Put expansion bolts D (not supplied) into ground, use
washer/lock washer C and hex nut B to fasten the bolts.
B
C
Fig.4.3
4.4.1 INSTALL EXTENSION TABLE
Tools Required for Assembly:
- Wrench 16mm
- L Wrench 6mm
- Install Extension tables A to main table C with bolt 1 and
washer 2.
- Install set screw 3 for micro-adjustment.
Fig.4.4.1
4.4.2 INSTALL BLADE GUARD AND HOSE
SUPPORT ROD
Tools Required for Assembly:
- Wrench 13mm
- Philips screwdriver
- Install Blade guard A to Riving knife C with part 1 and 2.
- Install Hose support rod B to right extension table with
part 3, 4, 5 and 6.
Fig.4.4.2
A
B
C
1
2
3
4
5
6
D
A
C
B
1
2
3
1
2
3
