-13-
4.4.3 INSTALL SQUARE SLIDING TABLE
- Put the square sliding table C into the slot of sliding
table A.(Deputy C/F not recommended installation)
- Put the support rod D into the hole of square sliding
table C and the hole on support arm E.
- Lock the handle B.
4.4.4 INSTALL TELESCOPIC FENCE
- Put the pin A of telescopic fence into the hole which is
on the square sliding table, and mount the handle B to the
pin.
- Lock the knob C for stable tighting.
- The D is designed to micro-adjust perpendicularity
between telescopic fence and blade.
4.4.5 INSTALL FENCE RAIL
Tools Required for Assembly:
- Wrench 24mm
- L Wrench 5mm
- Install scale seat B to tables with screw 1.
- Put the scale A into the slot of scale seat B.
- Install shaft 6 onto the guide rail C, and then mount the
guide rail to tables with part 2, 3, 4, 5 , 6and 7.
Fig.4.4.3
Fig.4.4.4(1)
Fig.4.4.5
4.4.6 INSTALL RIP FENCE
- Install the rip fence seat A to guide rail B as the picture
shown.
- Install the screw C onto the guide rail B.
- Install the rip fence D to the fence seat A along its slot.
A
D
C
B
Fig.4.4.6
B
C
D
A
E
F
A
D
C
B
A
B
C
Fig.4.4.4(2)
