Wood Stone FIRE DECK 6045, Инструкция по установке и эксплуатации

Страница: 8 / 32

FD-6045-CE and FD-8645-CE
Fire Deck Installation and Operation Manual
PG
8
OF 32
M0042.13 JULY 2019
UNLOADING & MOVING THE OVEN
Shown: FD-8645-CE
CAUTION HOT PRUDENCE CHAUD
USING A FORKLIFT .
The Wood Stone Fire Deck 6045 weighs approximately 1450 Kg (3200 lbs), and the 8645 weighs approximately 1975 Kg (4350 lbs),
and they are top-heavy�
Use a forklift with adequate fork lengths and lifting capacity� When using a forklift, always use the forklift pockets� Lifting the oven
any other way with a forklift may result in damage� Use extreme caution and make sure that the forks extend all the way through the
pockets provided� If it is necessary to approach the oven from the front, be sure the mast does not contact the stainless steel mantle
(shelf)�
There are fork pockets at the front and sides of the oven�
Note:
For the FD-8645-CE model, forklift capacity is different if lifting from
the front/rear or the sides�
Once the oven is on a smooth,
flat
floor it can be rolled on its optional heavy-duty, temporary shipping Casters (details next page)�
DO NOT TURN THE OVEN ON ITS SIDE! .
Moving a Wood Stone oven can present interesting
challenges to even the most experienced riggers� Make
sure to secure the proper equipment and make safety your
first priority� Please don’t hesitate to call the factory for
technical support�
USING A CRANE .
If you are planning to use a crane to unload the oven,
specify a flatbed truck delivery.
Use the pick-eyes provided on the sides of the oven to lift the
oven with a crane� The spreader bar should be of a sufficient
length to keep the sling from contacting the oven, and oriented
as shown in fig� 1�
Pickeye Capacity
per Beam
1814 Kg
(4,000 lbs)
LOAD
Orient Spreader Bar
as shown in fig. 1
50°MIN Angle
fig. 1
Pickeye
Beam
Front Forklift / Pallet Jack Pockets Side Forklift Pockets
Minimum Required
Forklift Capacities
Model
Lifting from
Front or Rear
Lifting from
Sides
Min� Fork
Length
FD-6045-CE 2722 kg / 6000 lbs 1.5m / 5'
FD-8645-CE
3629 kg /
8000 lbs
4082 kg /
9000 lbs
1.8m / 6'
WARNING
USING A PALLET JACK .
The oven may also be moved with a Pallet Jack using the front or rear fork
pockets only� Once the oven is on a
smooth, flat
floor it can be rolled to its final
position�
DO NOT ATTEMPT TO MANUALLY ROLL THE OVEN UP OR DOWN A
RAMP OR INCLINE. Do not position yourself between the moving oven and an
immovable object or surface such as a wall or door frame�
Use caution
near mantle