Blade Guide Arm Alignment
HDSdoc020719
6-8
6
See Figure 6-8.
2.
Use the arm adjustment screws, marked with blue arrows in the figure above, to adjust the arm up
until the slide pad touches the saw head brace tube. Tighten the jam nuts.
3.
Adjust the blade guide arm in all the way toward the other blade guide (minimum distance between
the guide rollers).
4.
Use the arm adjustment screws, marked with red arrows in the figure above, to adjust the arm up
until the slide pad touches the saw head brace tube. Tighten the jam nuts.
NOTE:
When adjusting the blade guide arm screws, be careful not to damage their threads or
deform the arm guide bushing. Operate the blade guide arm handle to ensure the arm moves easily
left and right when the handle is moved.
Horizontal Alignment
See Figure 6-9.
1.
With the blade guide arm still all the way in toward the other blade guide, tighten all the side screws
until they touch the arm. Back the screws off 1/4 turn and tighten the jam nuts.
2.
Sight across the horizontal saw head brace to view the blade guide arm. Adjust all side screws on
the blade guide arm housing so the arm is parallel to the saw head brace.
3.
To move the blade guide end of the arm toward the front of the sawmill, loosen jam nuts on the front
inside screw and the rear outside screw. Turn the screws counterclockwise one full turn and tighten
the jam nuts. Loosen the jam nuts on the front outside screw and the rear inside screw. Turn the
screws clockwise until they touch the arm, back off 1/4” turn, and tighten the jam nuts.
4.
To move the blade guide end of the arm toward the rear of the sawmill, loosen jam nuts on the front
FIG. 6-8
150128_C
Adjust front top and bottom
screws with arm open
Adjust rear top and bottom
screws with arm closed
Содержание LT15SC M2 E11S
Страница 1: ......
Страница 2: ......
Страница 120: ...Track Roller Distance Adjustment 6 6 17 HDSdoc020719 See Figure 6 18 FIG 6 18 0 5 mm 1 2 3...
