Wood-mizer LT15SC M2 E11S, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 101 / 123

Maintenance
Safety Devices Inspection (CE version only)
Maintenance 15doc020719 4-9
4
2. Green safety button inspection

Be sure the E-STOP button is released;

Press and hold the green safety button;

Turn on the blade motor. The motor should be started;

Release the safety button. The blade motor should be stopped.

Try to start the motor without pressing the safety button. The blade motor should remain
stopped.

Press and hold the green safety button. The blade motor should remain stopped.
3. Inspection of the control circuits with the E-STOP button pressed

Press and hold the green safety button;

Turn on the blade motor;

Press the E-STOP button located on the left side of the control box. The blade motor should
be stopped.

With E-STOP button pressed, try to move the saw head up and down (using the switch and
the Setworks buttons) and forward/backward using the power feed switch. Both systems
should not start.

With the E-STOP button pressed, try to start the debarker blade motor and move the
debarker arm in and out. The debarker should not work.
4. Blade cover safety switch and its circuit inspection

Press and hold the green safety button;

Turn on the blade motor;

Open the blade housing cover;

The blade motor should be stopped;

Try to start the motor. The blade motor should remain stopped;

Close the blade housing cover;

The blade motor should remain stopped until it is restarted with the START button.