ALIGNMENT
Sharpener Alignment
ALIGNMENT
doc121319
6-2
6
See Figure 6-1.
Position the tool so that all three set screws touch the fixed blade clamp plate.
Reinstall the grinding wheel mounting nut and tighten to secure in place.
5.
If any of the tool set screws does not touch the fixed clamp plate, loosen the sharpener head
mounting bolts shown in the figure below.
6.
Using the adjustment bolts, adjust the sharpener head in the horizontal plane so that all three
alignment tool set screws touch the fixed clamp plate. Secure in position by tightening the sharpener
head mounting bolts.
FIG. 6-1
IS203_023_B
IS
203_023_B
Alignment
Tool
Sharpener Head
Horizontal
Adjustment Bolts