SETUP & OPERATION
Blade Height Adjustment
2
2-5
BMS500/600doc121319
SETUP & OPERATION
2.3
Blade Height Adjustment
The BMS500/BMS600 sharpener is equipped with a blade height adjustment assembly that allows
smooth height adjustment of 1”(25 mm), 1 1/4” (31.25 mm), 1 1/2” (37.5 mm), 1 3/4" (43.75 mm), 2"
(50mm) and 3" (75mm) wide blades.
To install the blade, release the blade clamp by pushing the clamp handle down.
See Figure 2-5.
Position the blade on the pins of the blade height adjustment screws as shown
below. Use the blade height adjustment knob to adjust the blade height.
IMPORTANT!
After adjusting the blade height, adjust the blade
support arms in the vertical plane as necessary so the blade will
remain level around its complete length.
FIG. 2-5
IS203_022
Blade Height
Adjustment Knob
Blade
Blade Height
Adjustment
Pin
Blade Height
Adjustment
Screw
Blade Clamp
Handle
!
