4K IP Streaming Extender
32
Network Setting
Use this tab to modify the device 'hostname' and configure device IP address.
By default the device ‘hostname’ equals the device MAC address.
The device MAC address is also used as device ID by Control API Server. To rename a
device, enter a name (e.g. “room1”) into the ‘Hostname’ edit box. Press ‘Save’ button to
save new host name. The host name is persistent and kept until the device is forced
back to a factory default.
IP Address can be set to be either ‘DHCP’ or ‘Manual’
Select “DHCP” to receive IP address from DHCP server or be assigned Auto-IP
address in the 169.254.X.X range in the case there is no DHCP server on the
network.
Select “Manual” to set static IP address (IPV4 address, subnet mask and gateway
address)
Press ‘Save’ to save new IP address. New IP mode settings are stored in non-volatile
memory and kept until the device is forced back to factory default.
Note:
Special attention is required when assigning a manual IP address. The address
has to be both unique and reachable. Any mistake when enter the IP address, subnet
mask or gateway address can render the device unreachable.
