4K IP Streaming Extender
28
4)
Next to the
Send
button enter the IR string that is to be sent.
5)
Then click the
Send
button to send out the string.
6)
Paired devices will receive the IR data.
Note:
API Server is used to device debug.
Infrared Limitations
A Sender can either send IR data to a specific device (unicast) or broadcast to all
devices active on the network (broadcast). Should be noted however, that a sender
cannot send data simultaneously to a range of devices using multi-unicast
The data format used when sending IR data from control layer to a device is ‘Pronto’.
The link below points to a good description of Pronto format definition with examples.
http://www.remotecentral.com/features/irdisp1.htm
The pronto format is a series of hex numbers that describe everything that is needed to
generate the required waveform. It includes the carrier frequency, the ON/OFF period
along with data and error checksum.
Large libraries of Pronto IR codes are publicly available and easy to find on the Web.
The code below is a Pronto string to turn Sony BlueRay player ON and OFF
0000 0067 0000 0015 0060 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030
0018 0018 0018 0018 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018
0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0030 0018 0030 0018 0030
01FE
