4K IP Streaming Extender
16
Fast Switch Full Screen
The primary benefit of the Fast Switch Full Screen mode is that source switching
occurs quickly, it in fact appears seamless to the human eye.
All the RX devices are listed on the top half of the Decoder section. Similarly, all the TX
devices are listed on the bottom half under the Encoder section.
5.3.1 Video Switching
Here select
Genlock mode
as an example to join TX and RX devices:
1) Verify if the RX tile is displaying that device is currently in Genlock mode. The
information indicated in a device tile includes the Video mode. If Genlock is not the
currently active mode, apply the setting as follows:
a) Right mouse click over the appropriate Decoder (RX) tile.
b) In menu that appears select Genlock as the Video Mode.
2) Next join the RX to TX.
a) In the Encoder section, select a TX by clicking on its associated active tile with
left mouse button.
b) While holding down the left button, drag the TX tile over the RX tile it is to be
joined with (RX discovered on the network are displayed under the Decoders
section) and then release the mouse button to drop the TX tile onto the RX tile.
