![Wolf Garten Premio 40 EAKF Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/wolf-garten/premio-40-eakf/premio-40-eakf_instruction-manual_993143011.webp)
11
According to law in some countries lawn mowing not allowed on Saturdays and Sundays and at certain other times (eg. at midday
or after 7 p.m.). Please check noise abatement regulations prevailing in your country.
Fixing of handle and adjustment of height (fig. M1/M2)
ATTENTION! Take care that the switch cable does not become caught and crused when folding the handle frame.
Fold down upper handle part M1 (1). Tighten handwheels for the handle attachment M1 (2). Turn brackets for the cable guide M2
(3) to the left or right until the entire handle rod M2 (4) can easily be folded backward; it must click into the right and left recess
M2 (5). Then set the desired body height and tighten handwheels M2 (6).
Folding of handle frame (fig. M2/M3)
ATTENTION! Take cara that the switch cable does not become caught and crushed when folding the handle frame.
Turn brackets for the cable guide M2 (3) to the left or right. Loosen lower handwheels M3 (1) until the handle rod M3 (2) can be
pulled apart about 2 cm and folded forward slightly.
Anti-kink protection(fig. M4)
IMPORTANT!
The cable must always lie in the anti-kink protector.
Assembly of the strain relief assembly with earth rod (Fig. M5/M6/B6)
To connect the cable of the machine to the power outlet, first activate the transport safety mechanism*: Position „STOP“ M6 (1).
Then pull the required length of cable from the cable drum. Insert the cable in the strain relief assembly M5. Guide the earth rod
through the strain relief assembly and then push it into the ground. Use a hammer if necessary.
Make sure that the cable distance between the power outlet and the earth rod B6 is as short as possible. Excess unrolled cable
must be rolled up again. To do this, rotate the lower drum half clockwise M6 (3).
*
Prevents the cable from accidental unrolling from the cable drum.
Important
Never switch on the machine when loose cable in loops or rings is lying on the lawn. Excess unrolled cable must be rolled up again
before switching on the machine. To do this, rotate the lower drum half clockwise M6 (3).
Connecting to the mains
(230 Volts, A.C., 50 Hz)
The mower operates from any normal household mains supply, provided with a 13 Amps. fuse.
Note:
Use a residual current
device (RCD) rated for a residual current not greater than 30 mA.
Attaching of grassbox (fig. B1)
Lift deflector lid, locate grassbox hook into opening of chassis (see arrow) and replace lid.
Use of heigth adjustment (fig. B2)
Only when mower is stationary and rotating blade has come to complete standstill.
Place hand into handle bar and depress button. Lift or lower chassis until it engages into required position (see indicator).
6. Maintenance:
• Switch off motor and remove mains plug before carrying out any repairs or maintenance to your mower;
• Do not clean yor mower with a hose pipe - and particularly not with a high-pressure spray;
• Inspect regularly all visible nuts and bolts - particularly ot the cutter blade - for their tightness;
• ATTENTION! Sharpening and changing of cutter blades should be done by a qualified service centre because it is necessary that the correct
balance after fixing is guaranteed;
• Damaged and worn parts must always be replaced with original WOLF replacement parts as otherwise your guarantee will be invalidated;
• Your service centre should check your mower regularly and particularly after any hard obstacle hat hit the chassis and/or the cutter blades;
• Store your mower only in a dry room.
• If cutter blade hits a hard foreign object whilst mowing switch of motor immediately, remove safety key and check cutter blade carefully for damage.
Please observe these hints, as they help you to prevent damage or even accidents!
• Conduct maintenance and cleaning work only when the motor is switched off and the key has been removed.
Safety Instructions
Operating Times
Operation
Assembly
Assembly Premio 40 EAKF
Mount the included cable clamp element (1) in such a way that the two Bowden
cables do not come into contact with the cable reel (2).
Premio 40 EAKF
Содержание Premio 40 EAKF
Страница 32: ...32 Notes...
Страница 33: ...33...