Page
46
APPENDIX A: Connecting the AMP1-16-
M to a LAN
Introduction
This appendix describes how to connect your PC to your AMP1-16-M through a local
area network (LAN) and to configure the monitor using the Wohler AMP1-16-M
Manager PC program.
Alternatively, you may connect your unit to your computer directly with a single
Ethernet cable. Refer to Appendix B for instructions regarding this method.
If you have not already installed the AMP1-16-M Manager software on your PC,
Please continue with these instructions until the manager has been installed.
Requirements
1.
You must have a PC or laptop that:
a.
Is running Windows XP, Vista, or Windows 7,
b.
Is connected to a LAN, and
c.
Has access to the Internet.
2.
An IP address from your network administrator (not required if your network
uses DHCP)
3.
An IP mask from your network administrator (not required if your network
uses DHCP)
4.
A standard Ethernet cable to connect the AMP1-16-M to your LAN
5.
Your product’s serial number (if you have not already created a user ID and
password for the Wohler web site)
Downloading the File
You will need to download the AMP1-16-M Manager from the Wohler web site.
1.
Power up your PC and create a folder on your desktop called AMP1-16-M.
2.
Launch the web browser and navigate to the Wohler web site:
www.wohler.com.
